Papers - Tateyama Kohei

Division display >> ／  All the affair displays  1 - 24 of about 24

  1. Tensile Properties Under a Wide Range of Strain Rates and Penetration Stength of Abrasion-Resistant Steel

    Tomohisa KUMAGAI, Hayato TOKUNAGA, Kazuma SUZUKI, Kohei TATEAYAMA, and Hiroyuki YAMADA，Journal of Pressure Vessel Technology，2025.06

  2. Compressive Deformation Behavior of Artificial Pumice for Reinforcement of Existing Shelter Against Ballistic Ejecta of Volcanic Eruption

    Kohei TATEYAMA, Kazuma ABE, Hiroyuki FUJIKI, Hisashi SASAKI, hiroyuki YAMADA，Applied Mechanics，vol.6，(2)，2025.06

  3. Effects of Strain Rate and Temperature on Plastic Deformation Behavior of Molybdenum-Based High-Speed Tool Steel HS-6-5-2

    Tateyama Kohei, Yamada Hiroyuki, Kobayashi Hidetoshi，Journal of Dynamic Behavior of Materials，vol.11，(p.230 ～ 242)，2025.05

  4. Experimental study on Reinforcement method of Impact-Resistant Shelters Against Ballistic Ejecta Using Artificial Pumice

    久保智弘，吉本充宏，本多亮，西澤達治，立山耕平，山田浩之，BULLETIN OF THE VOLCANOLOGICAL SOCIETY OF JAPAN，vol.70，(1)，(p.3 ～ 12)，2025.03

  5. Performance Evaluation of Electromagnetic Shield Constructed from Open-Cell Metal Foam Based on Sphere Functions

    Yuya Hanaoka, Taku Itoh, Kohei Tateyama, Susumu Nakata, Keiko Watanabe，Computer Modeling in Engineering & Sciences，vol.132，(1)，(p.43 ～ 53)，2022.06

  6. Impact Resistance of Mountaineering Helmets to Simulated Lapilli

    山田 浩之, 鵜飼 悠帆, 樋口 理宏, 立山 耕平, 佐々木 寿, 保科 祐一郎, 和田野 加恵, 小笠原 永久，Journal of the Society of Materials Science, Japan，vol.70，(11)，(p.824 ～ 830)，2021.11

  7. Position and Attitude Measurement for Linearly Moving Object Using Magnet-Coil Method

    立山 耕平, 小濱 直樹, 渡辺 圭子，Journal of the Society of Materials Science, Japan，vol.70，(11)，(p.816 ～ 823)，2021.11

  8. Pressure-Wave Propagation in Magnetorheological Fluid

    立山 耕平, 三谷 祐哉, 渡辺 圭子，Journal of the Society of Materials Science, Japan，vol.70，(11)，(p.810 ～ 815)，2021.11

  9. Nonuniform Deformation of Cell Structures owing to Plastic Stress Wave Propagation

    Tateyama Kohei, Yamada Hiroyuki，Applied Mechanics，vol.2，(4)，(p.911 ～ 931)，2021

  10. Shape Modelling of Metal Foams of Open/Closed States and their Intermediates by Implicit Function

    Y. Hanaoka, T. Itoh, K. Tateyama, S. Nakata, K. Watanabe,，Journal of Advanced Simulation in Science and Engineering，vol.18，(1)，(p.143 ～ 153)，2021

  11. Impact Resistance of Steel Materials to Ballistic Ejecta and Shelter Development using Steel Deck plates

    H. Yamada, K. Tateyama, M. Yoshimoto, S. Torigata, S. Naruke, S. Sasaki, T. Fujii,，Journal of Applied Volcanology，vol.10，(5)，(p.1 ～ 15)，2021

  12. Impact Resistance Evaluation of Tatami to Improve the Safety of Mountain Huts

    立山 耕平, 成毛 志乃, 佐々木 寿, 福井 拓哉, 山田 浩之，BULLETIN OF THE VOLCANOLOGICAL SOCIETY OF JAPAN，vol.65，(2)，(p.41 ～ 51)，2020.06

  13. Simple Structural Reinforcement of Roof of Wooden Buildings Subjected to Ballistic Ejecta Impact

    山田 浩之, 立山 耕平, 本多 亮, 吉本 充宏, 藤井 敏嗣，BULLETIN OF THE VOLCANOLOGICAL SOCIETY OF JAPAN，vol.64，(4)，(p.243 ～ 251)，2019.12

  14. DEVELOPMENT OF SCATTERING PREVENTION SHEET USING HIGH STRENGTH FIBER FABRIC AT THE SITE OF CONSTRUCTION DEMOLITION

    立山 耕平, 清酒 芳夫, 上條 宏明, 山田 浩之，建設機械施工 = Journal of JCMA : 一般社団法人日本建設機械施工協会誌，vol.71，(10)，(p.71 ～ 78)，2019.10

  15. COMPRESSIVE PROPERTIES OF FINISHING MATERIALS SUCH AS GYPSUM BOARDS IN A WIDE RANGE OF STRAIN RATES

    中楚 洋介, 立山 耕平, 山田 浩之, 川口 健一，Journal of Structural and Construction Engineering (Transactions of AIJ)，vol.84，(766)，(p.1525 ～ 1532)，2019

  16. Separation Behavior Evaluation of Notched Bolt for Rocket Payload Fairing Separation System

    雨川 洋章, 山田 浩之, 立山 耕平, 山﨑 祥弘, 伊海田 皓史, 紙田 徹, 西元 美希，JOURNAL OF THE JAPAN SOCIETY FOR AERONAUTICAL AND SPACE SCIENCES，vol.67，(2)，(p.57 ～ 66)，2019

  17. Effect of Strain Rate and Inner Fluid on Compressive Deformation Behavior in Formed Polyethylene Film

    山田 浩之, 立山 耕平, 小笠原 永久，Journal of the Society of Materials Science, Japan，vol.67，(11)，(p.970 ～ 976)，2018.11

  18. Impact resistance to ballistic ejecta of wooden buildings and a simple reinforcement method using aramid fabric

    Yamada Hiroyuki, Tateyama Kohei, Sasaki Hisashi, Naruke Shino, Kishimoto Hiroshi, Yoshimoto Mitsuhiro，JOURNAL OF VOLCANOLOGY AND GEOTHERMAL RESEARCH，vol.359，(p.37 ～ 46)，2018.06

  19. Evaluation for Mechanical Properties of Wasted Tire Reinforced PLA

    坂井 建宣, 川井 喬介, 蔭山 健介, 立山 耕平, 山田 浩之，強化プラスチックス，vol.64，(1)，(p.31 ～ 35)，2018.01

  20. Development of Universal Rate Range Load-Cell

    立山 耕平, 覚野 千尋, 小笠原 永久, 山田 浩之，Journal of the Japanese Society for Experimental Mechanics，vol.17，(2)，(p.131 ～ 138)，2017

  21. Development of Dynamic and Impact Load-Measuring Apparatus with Opposite Load-Cells

    山田 浩之, 覚野 千尋, 立山 耕平, 小笠原 永久，Journal of the Japanese Society for Experimental Mechanics，vol.17，(2)，(p.117 ～ 123)，2017

  22. Effect of strain rate on compressive properties of foamed polyethylene film

    Tateyama Kohei, Yamada Hiroyuki, Ogasawara Nagahisa，POLYMER TESTING，vol.52，(p.54 ～ 62)，2016.07

  23. Effect of Foam Structure on Impact Compressive Properties in Foamed Polyethylene Film

    K. Tateyama, H. Yamada, N. Ogasawara，Applied Mechanics and Materials，vol.715，(p.159 ～ 164)，2016

  24. Quasi-static and Impact Compressive Properties of Formed Polyethylene Film with Closed Cell

    H. Yamada, K. Tateyama, R. Okui, N. Ogasawara, K. Ogawa,，Journal of the Japanese Society for Experimental Mechanics，vol.14，(p.153 ～ 157)，2014

< PREV - NEXT >

  • 1
To the head of this page.▲