International conference proceedings - Tateyama Kohei

Division display >> ／  All the affair displays  1 - 31 of about 31

  1. Impact Energy Absorption Properties of Artificial Pumice

    Kohei Tateyama, Fujiki Hiroyuki, Kiyonobu Ohtani，Proceedings of the Twenty-fourth International Symposium on Advanced Fluid Information，2024.11

  2. Strain rate dependence of the compressive strength of polymer lattice structures with typical unit cell topologies

    Tomohisa Kojima, Takahiro Kawano, Hidaka Ishii, Kohei Tateyama, Hiroyuki Yamada, Kensuke Kageyama, Tomoaki Tsuji，APCFS2024，2024.11

  3. Modeling of strain rate-dependent compression properties of rigid polymer foam in relation to foaming properties

    Tomohisa Kojima, Takahiro Kawano, Yuta Takase, Kohei Tateyama, Hiroyuki Yamada, Kensuke Kageyama, Tomoaki Tsuji，IWACOM-IV，2024.09

  4. Impact Compression Properties of Artificial Pumice Under Confined Condition

    Kohei Tateyama, Hiroyuki Fujiki, Hisashi Sasaki, Nagahisa Ogasawara and Hiroyuki Yamada，14th International Conference on the Mechanical and Physical Behaviour of Materials under Dynamic Loading，2024.09

  5. Experimental Study of Impact Absorption Effect of Overlying Artificial Pumice Layer for Dealing with Ballistic Rock Impact

    Mitsuhiro Yoshimoto, Tomohiro Kubo, Ryo Honda, Tatsuji Nishizawa, Kohei Tateyama, Hiroyuki Yamada，Proceedings of Cities on Volcanoes 12 ，2024.02

  6. Impact Compressive Deformation Behavior of Artificial Pumice for Reinforcement of Shelter against Ballistic Ejecta

    K. Tateyama, H. Fujiki, H. Sasaki, N. Ogasawara and H. Yamada，Proceedings of the 11th International Symposium on Impact Engineering，2023.12

  7. Mechanical characterization of Polymeric Lattice Structure Subject to Dynamic Loading

    Tomohisa Kojima, Ryoya Kuriyama, Takahiro Kawano, Hiroyuki Yamada, Kohei Tateyama, and Tomoaki Tsuji，Proceedings of the 11th International Symposium on Impact Engineering，2023.12

  8. Effect of Sound Velocity in Magnetorheological Fluids on Pressure Attenuation

    T. Sugimoto, K. Tateyama, M. Kiuchi and K. Watanabe，ATEM-iDICs '23, JSME-MMD & iDICs，2023.10

  9. Effect of Artificial Defect on Deformation Behavior of Cell Structures

    T. Ori, K. Tateyama and H. Fujiki，ATEM-iDICs '23, JSME-MMD & iDICs，2023.10

  10. Effect of Geometric Shape on Compressive Behavior of Cellular Structures

    K. Maebara, K. Tateyama, M. Kiuchi and K. Watanabe，ATEM-iDICs '23, JSME-MMD & iDICs，2023.10

  11. Modeling of Metal Foams with Adjustable Wall Thickness in Targeted Direction

    Naoki Hamano, Taku Itoh, Kohei Tateyama, Susumu Nakata, Keiko Watanabe，The 42nd JSST Annual International Conference on Simulation Technology，2023.08

  12. Interaction of Cell Wall Thickness and Node Shape on Compressive Properties of Cell Structures

    K. Tateyama and H. Fujiki，Proceedings of 20th International Conference on Experimental Mechanics，2023.07

  13. Mechanical Properties of Bellows Considering Cross sectional Deformation due to Internal Pressure

    Shuto Arashiro, Kohei Tateyama, Hiroyuki Fujiki，Proceedings of JSME International Conference on Materials and Processing 2022，2022.11

  14. Dynamic Compressive Behavior of Polymeric Micro lattice Structure Fabricated by Optical 3D Printer

    Ryoya Kuriyama, Takahiro Kawano, Tomohisa Kojima, Hiroyuki Yamada, Kohei Tateyama, Tomoaki Tsuji ，Proceedings of JSME International Conference on Materials and Processing 2022，2022.11

  15. Effect of Internal Air on Compressive Properties of Foamed Polymer

    Kohei Tateyama, Hiroyuki Fujiki，Proceedings of JSME International Conference on Materials and Processing 2022，2022.11

  16. Effect of strain rate on compressive properties in artificial pumice

    Riku Kimura, Hiroyuki Yamada, Nagahisa Ogasawara, Kohei Tateyama, Hisashi Sasaki ，Proceedings of JSME International Conference on Materials and Processing 2022，2022.11

  17. Shape Modeling of Metal Foam Based on Implicit Surfaces Generated from Deformed Polyhedra

    Naoki Hamano, Taku Itoh, Kohei Tateyama, Susumu Nakata, Keiko Watanabe，The 41h JSST Annual International Conference on Simulation Technology，2022.09

  18. Investigation of Pressure Wave Propagation Behavior in Magnetorheological Fluids Using an Experimental Equipment that Incidents Plane Waves

    Daiki Tanaka, Kohei Tateyama, Keiko Watanabe，16th International Symposium on Advanced Science and Technology in Experimental Mechanics，2021

  19. Effect of microstructure on dynamic compressive behavior of cellular materials

    K. Tateyama, K. Watanabe，13th International Conference on the Mechanical and Physical Behaviour of Materials under Dynamic Loading，2021

  20. Evaluation of Compressive and Energy Absorption Characteristic of a Closed-cell Polymeric Foam subject to Dynamic Loading

    Takahiro Kawano, Yuta Takase, Tomohisa Kojima, Hiroyuki Yamada, Kohei Tateyama, Tomoaki Tsuji，13th International Conference on the Mechanical and Physical Behaviour of Materials under Dynamic Loading，2021

  21. 3-D Identification Method of Moving Object Using Sub Coil

    Naoki Kohama, Kohei Tateyama, Keiko Watanabe，16th International Symposium on Advanced Science and Technology in Experimental Mechanics，2021

  22. Measurement of Stress Waves Passing through Glass Beads using SHB Test Equipment

    Yosuke Arai, Kohei Tateyama, Keiko Watanabe，16th International Symposium on Advanced Science and Technology in Experimental Mechanics，2021

  23. Effect of microstructure on mechanical properties in cell materials

    K. Tateyama, Y. Hayakawa, S. Nakata, K. Watanabe，3rd International Conference on Computational Engineering and Science for Safety and Environmental Problems，2020

  24. Pressure Wave Propagation During Projectile Penetration into Sand

    K. Tanabe, T. Onodera, K. Tateyama, K. Watanabe，International Symposium on Impact Engineering 2019，2019.07

  25. Compressive Properties of Foamed Polyethylene Film with Cell Shape Anisotropy

    K.TATEYAMA, H.YAMADA, N.OGASAWARA，10th International Symposium on Impact Engineering 2019，2019.07

  26. Propagation Characteristic of Pressure Wave Induced by Impact in MR Fluids

    Y. Mitani, T. Hagi, K. Tateyama, K. Watanabe，International Symposium on Impact Engineering 2019，2019.07

  27. Effect of Strain Rate on Compressive Behaviour of Silicone Rubber

    Tateyama Kohei, Yamada Hiroyuki, Ogasawara Nagahisa，12TH INTERNATIONAL CONFERENCE ON THE MECHANICAL AND PHYSICAL BEHAVIOUR OF MATERIALS UNDER DYNAMIC LOADING (DYMAT 2018)，vol.183，Article Number:02044，2018

  28. Dynamic Compressive Behaviour of Closed-Cell Foam Materials Using Load-Measuring Apparatus with Opposite Load-Cells

    Yamada Hiroyuki, Tateyama Kohei, Ogasawara Nagahisa, Watanabe Keiko，12TH INTERNATIONAL CONFERENCE ON THE MECHANICAL AND PHYSICAL BEHAVIOUR OF MATERIALS UNDER DYNAMIC LOADING (DYMAT 2018)，vol.183，Article Number:02031，2018

  29. Foam Structure and Inner Fluid in Foamed Polymer Materials using SPH-FEM Method

    K.TATEYAMA, H.YAMADA, N.OGASAWARA，11th International Symposium on Advanced Science and Technology in Experimental Mechanics，2016.11

  30. Dynamic compressive behavior of foamed polyethylene film

    Tateyama Kohei, Yamada Hiroyuki, Ogasawara Nagahisa, Okui Ryo, Ogawa Kinya，DYMAT 2015 - 11TH INTERNATIONAL CONFERENCE ON THE MECHANICAL AND PHYSICAL BEHAVIOUR OF MATERIALS UNDER DYNAMIC LOADING，vol.94，Article Number:01038，2015

  31. Dynamic Compression Properties of Polymeric Foam Material Using a Drop-Weight Testing Machine with Opposed Load Cell

    K.TATEYAMA, H.YAMADA, N.OGASAWARA, K.OGAWA，Proceedings of International Conference on Experimental Mechanics 2014，2014.11

< PREV - NEXT >

  • 1
To the head of this page.▲