International conference proceedings - Kazama Toshiharu

1. Geometrical Reduction Measures of Jet-Cavitation Erosion and Quantitative Measurement Methods of Solid Surface Damage

   T. Kazama, H. Hayashi, Y. Sasaki, Y. Narita, and Y. Osafune，Proceedings of The 10th International Conference on Manufacturing, Machine Design and Tribology，(p.294 ～ 295)，2025.04，Himeji

   

2. Influence of Lubricant Physical Property Models on Thermal Elastohydrodynamic Lubrication Solutions

   T. Kazama，International Conference on Leading Edge Manufacturing in 21st Century，(p.142 ～ 147)，JSME，2021.11，Kitakyushu (online)

   

3. Experimental Analysis of Rotational Motion of the Pistons and Slippers of a Swashplate Axial Piston Pump Using Visualization Technique

   Furuya, T., Haga, T., and Kazama, T.，The 11th JFPS International Symposium on Fluid Power HAKODATE 2020，(p.1 ～ 4)，2021.10，Hakodate

   

4. Effect of Sealing Surface Flatness on Leakage Characteristics of Flange-Type Gasket Model Using Oil Viscosity-Temperature Relations

   Gao, S. and Kazama, T.，The 11th JFPS International Symposium on Fluid Power HAKODATE 2020，(p.1 ～ 7)，2021.10，Hakodate

   

5. Optimum Hydraulic Oil Viscosity Based on Slipper Model Simulation for Swashplate Axial Piston Pumps/Motors

   T. Kazama，Proceedings of the 6th Korea-Japan-China Joint Workshop on Fluid Power 2021，(p.94 ～ 101)，2021.07，Busan

   

6. Leakage Characteristics of Prototype Gasket Using Viscosity-Temperature Relation Under Vibration Condition (Effects of Sealing Land and Viscosity Grade)

   S. Gao and T. Kazama，Proc. ICFP2021，(p.685 ～ 689)，2021.04，Hangzhou

   

7. A Case Study of Introducing Learning Elements into A Mechanical Engineering Classroom (Utilizing Hands-on Materials and Small Workshops on Machine Elements and Design)

   Kazama, T.，Proc. The 5th International Conference on Design Engineering and Science, ICDES 2020，(p.22 ～ 27)，JSDE，2020.11，Kitakyushu (online)

   

8. Mathematical Modeling of A Multi-Land Slipper for Swash-Plate Type Axial Piston Pumps and Motors

   Kazama, T.，Proc. The 5th China-Japan Joint Workshop on Fluid Power 2018 in Beijing，(p.46 ～ 50)，CMES，2018.07，Beijing

   

9. Cavitation Erosion in the Portion of an Oil Passage Through which Bubbles Pass

   K. Kumagai and T. Kazama，Proceedings of the Symposium on Fluid Power and Motion Control，(p.1 ～ 7)，Article Number:(7 pages)，FPMC，2017.10，Florida

   

10. Jet Cavitation Erosion of Hollow Cylinders (An Experimental Investigation into the Effects of Chamfers and Tapers)

    T. Kazama, K. Kumagai, I. Sakami, and Y. Narita，Proc. The 10th JFPS International Symposium on Fluid Power Fukuoka 2017，(p.1037 ～ 1043)，Article Number:2D16，2017.10，Fukuoka

    

11. Numerical Simulation of A Slipper with Retainer for Axial Piston Pumps and Motors under Swashplate Vibration

    T. Kazama，Proc. The 4th Japan-China Joint Workshop on Fluid Power 2016 in Tokyo，(p.39 ～ 44)，JFPS，2016.05，Tokyo

    

12. Lubrication Characteristics of Temperature-Viscosity-Controlled Hydrodynamic Journal Bearings

    T. Kazama, K. Saito, Y. Narita, N. Tanimura, and N. Hanajima，Proc. ITC2015，(18pD-03, DVD)，(p.368 ～ 369)，JAST，2015.09，Tokyo

    

13. Relation between Sliding-Part Temperature and Clearance Shape of a Slipper in Swashplate Axial Piston Motors

    T. Kazama, M. Suzuki, K. Suzuki，Proc. The 9th JFPS International Symposium on Fluid Power Matsue 2014，(2B1-3, USB)，JFPS，2014.10，Shimane

    

14. On Thermal Lubrication Characteristics of Hydraulic Pumps (Comparison Among Piston, Vane, and Gear Types)

    T. Kazama，Proc. MOVIC2014 (The 12th International Conference on Motion and Vibration), No.14-202，(2D31, USB)，(p.1 ～ 11)，JSME，2014.08，Sapporo

    

15. Effects of Oblique Surfaces with Grooves on Erosion by Cavitating Oil Jet

    T. Kazama, K. Kumagai, Y. Osafune, Y. Narita, S. Ryu，Proc. The 12th International Symposium on Fluid Control, Measurement and Visualization, FLUCOME2013，(OS1-03-4, USB)，(p.1 ～ 10)，VSJ，2013.11，Nara

    

16. Evaluation of Submerged Jet Cavitation Erosion with CFD

    Kumagai, K., Ryu, S., and Kazama, T.，Proc. JFPS, Okinawa 2011, 1B1-3，(p.116 ～ 121)，JPFS，2011.10，Okinawa

    

17. Experiment on Behavior of Slippers for Swashplate-Type Axial Piston Motors

    Suzuki, M., Akita, H., Saito, T., and Kazama, T.，Proc. JFPS, Okinawa 2011, 1B3-1，(p.157 ～ 162)，JPFS，2011.10，Okinawa

    

18. Temperature Measurement of A Cam-Ring and Side-Plates in A Vane Pump

    Kazama, T. and Narita, Y.，Proc. JFPS, Okinawa 2011, 1B1-4，(p.122 ～ 127)，JPFS，2011.10，Okinawa

    

19. Tribological Approach to Side-Plates in External Gear Pumps (Temperature Measurement, Vibration Analysis, and Geometry Design)

    Kazama, T., Oguma, S., and Huang, R.，Proc. The 2nd International Conference on Design Engineering and Science，(p.235 ～ 240)，JSDE，2010.11，Tokyo

    

20. Effect of Nozzle Outlet Geometry and Impinged Surface Geometry on Erosion Caused by Cavitating Jets for Hydraulic Equipment

    Kazama, T., Kumagai, K., and Narita, Y.，Proceedings of Thailand-Japan International Symposium in Industrial Engineering，(p.5 ～ 9)，CMU，2010.11，Chiang Mai

    

21. Measurement of Frictional Torque and Clearance Shape of Slippers for Swashplate-Type Axial Piston Motors

    Saito, T., Kazama, T., Narita, Y., Suzuki, M., and Akita, H.，Proceedings of Thailand-Japan International Symposium in Industrial Engineering, Mechanical Engineering and Robotics 2010 (TJIEME-CMU-MuroranIT-2010)，(p.1 ～ 4)，CMU，2010.11，Chiang Mai

    

22. Reduction and Enlargement of Erosion by A Submerged Cavitating Jet with Geometric Control

    Kazama, T., Kumagai, K., Miura, Y. and Narita, Y.，Proc. 9th Pacific Rim International Conference on Water Jetting Technology，2009.11，Koriyama

    

23. A Thermohydrodynamic Lubrication Model Applicable to A Slipper of Swashplate Type Axial Piston Pumps and Motors

    Kazama, T.，Proceedings of World Tribology Congress 2009，(p.528 ～ )，JAST，2009.09，Kyoto

    

24. Simultaneous Temperature Measurements of Bearing/Seal Parts of A Swash Plate Type Axial Piston Pump

    Kazama, T., Sasaki, H. and Narita, Y.，Proceedings of ICMDT2009, The 3rd International Conference on Manufacturing, Machine Design and Tribology，(p.61 ～ )，KSME-JSME，2009.06，Jeju

    

25. Temperature Measurement of Tribological Parts in Swash-Plate Type Axial Piston Pumps

    Kazama, T., Tsuruno, T. and Sasaki, H.，Proceedings of the 7th JFPS International Symposium on Fluid Power, TOYAMA 2008，vol.P1-16，(p.CD-ROM ～ )，JFPS，2008，Toyama

    

26. Erosion due to Impingement of Submerged Cavitating Jets in Tap Water, Biodegradable and Mineral Oils

    Kazama, T. and Shimizu, K.，Proc. Tenth Scandinavian International Conference on Fluid Power, SICFP07，(p.91 ～ 105)，University of Tampere，2007，Tampere

    

27. Mixed Lubrication Simulation of Hydrostatic Spherical Bearings for Hydraulic Piston Pumps/Motors (Effect of Caulking of Bearing Socket)

    Kazama, T.，Proc. International Conference on Manufacturing, Machine Design and Tribology，(p.CD-ROM ～ )，JSME-KSME，2007，Sapporo

    

28. Mixed lubrication of spherical bearings for water-hydraulic piston pumps and motors

    Kazama, T.，Proceedings of ASIATRIB 2006，2006，Kanazawa

    

29. Analysis of A Hydrostatic Bearing System Combined with Spherical and Thrust Bearings: Modeling of A Piston/Slipper Assembly in Hydraulic Piston Pumps/Motors

    Kazama, T.，Proc. International Conference on Manufacturing, Machine Design and Tribology，(p.CD-ROM ～ )，KSME-JSME，2005，Seoul

    

30. Numerical Simulation of A Slipper Model for Water Hydraulic Pumps/Motors in Mixed Lubrication

    Kazama, T.，Proceedings of the 6th JFPS International Symposium on Fluid Power，(p.CD-ROM ～ )，JPFS，2005，Tsukuba

    

31. High Pressure Hydrostatic Thrust Bearings in Mixed Lubrication -- Effects of Elastic Deformation on Optimum Conditions

    Kazama, T., Fujiwara, M. and Yamaguchi, A.，Proceedings of the 17th International Congress of Mechanical Engineering，(p.CD-ROM ～ )，ABCM，2003，Sao Paulo

    

32. Evaluation of Erosion-Resisting Properties of Plastics and Metals Using Cavitating Jet Apparatus

    Yamaguchi, A., Kazama, T. and Wang, X.，Proc. 49th National Conference on Fluid Power，(p.49 ～ 56)，NFPA，2002，Las Vegas

    

33. Motion of Eccentrically and Dynamically Loaded Hydrostatic Thrust Bearings in Mixed Lubrication

    Kazama, T., Yamaguchi, A. and Fujiwara, M.，Fluid Power，vol.5，(p.233 ～ 238)，JFPS，2002，Nara

    

34. A Comparative Newtonian and Thermal EHL Analysis Using Physical Lubricant Properties

    Kazama, T.，Boundary and Mixed Lubrication: Science and Applications，(p.435 ～ 446)，Elsevier，2002，Wien

    

35. Effects of Configuration of Nozzles, Outlets of Nozzles and Specimens on Erosion due to Impingement of Cavitating Jet

    Kazama, T. and Yamaguchi, A.，Proc. 48th National Conference on Fluid Power，(p.263 ～ 272)，NFPA，2000，Chicago

    

36. Experiment on Frictional Characteristics of Pneumatic Cylinders

    Kazama, T. and Fujiwara, M.，Fluid Power，vol.4，(p.453 ～ 458)，JHPS，1999，Tokyo

    

37. Effect of Elastic Deformation on Hydrostatic Thrust Bearings for Hydraulic Equipment

    Kazama, T., Iwasaki, N. and Yamaguchi, A.，Power Transmission and Motion Control，(p.259 ～ 268)，Professional Engineering Publishing，1998，Bath

    

38. Performance Improvement of a Reciprocating Air Compressor

    Fujiwara, M. and Kazama, T.，Proc. International Compressor Engineering Conference，(p.731 ～ 736)，1998，Purdue

    

39. Shock Absorption by Oil Films Applicable to Bearing and Seal Parts of Hydraulic Equipment

    Kazama, T. and Yamaguchi, A.，Tribology for Energy Conservation (Proc. Leeds-Lyon Symposium on Tribology)，(p.195 ～ 204)，1997，London

    

40. Comparison of Cavitation Erosion Test Results Between Vibratory and Cavitating Jet Methods

    Yamaguchi, A., Kazama, T., Inoue, K. and Onoue, J.，FPST-Vol. 4/DSC-Vol. 63, Fluid Power Systems and Technology, Collected Papers, (Proc. 1997 ASME International Mechanical Engineering Congress and Exposition)，(p.125 ～ 130)，1997，Dallas

    

41. Experiment on Hydrostatic Thrust Bearings in Mixed Lubrication for High Pressure Hydraulic Pumps and Motors

    Kazama, T., Yamaguchi, A., Wang, X. and Akasaka, Y.，Fluid Power (Proc. 3rd JHPS International Symposium on Fluid Power, Japan)，(p.431 ～ 436)，JFPS，1996，Yokohama

    

42. Reciprocating Micro Air Compressor

    Fujiwara, M. Kazama, T. and Gunji, Y.，Proc. International Compressor Engineering Conference，(p.43 ～ 48)，1996，Purdue

    

43. Effects of Elastic Deformation on Optimum Design Criteria of HydrostaticThrust Bearings for Hydraulic Equipment in Mixed Lubrication

    Kazama, T. and Yamaguchi, A.，Proc. International Tribology Conference，(p.1291 ～ 1296)，1995，Yokohama

    

44. Optimum Design of Bearing/Seal Parts for Hydraulic Equipment on Mixed Lubrication

    Kazama, T. and Yamaguchi, A.，Fluid Power (Proc. 2nd JHPS Int. Symp. Fluid Power, Tokyo, Japan)，(p.515 ～ 520)，1993，Tokyo

    

45. Buffer Action of Fluid Films

    Yamaguchi, A. and Kazama, T.，Proc. International Conference Fluid Power Control&Robotics，(p.622 ～ 627)，1990，Chengdu

    

46. Thermoelastic Analysis of Hydrostatic Thrust Bearings for Hydraulic Equipment, Fluid Power

    Kazama, T., Yamaguchi, A. and Shimizu, S.，Proc. 1st JHPS International Symposium on Fluid Power, Japan，(p.415 ～ 422)，1989，Tokyo