Papers - Teramoto Koji

Division display >> ／  All the affair displays  1 - 38 of about 38

  1. 工作物剛性の低下を伴うエンドミル加工における工作物変形挙動のモデル化

    寺本 孝司, 中尾 祐大朗, 日比野 悠椰，日本機械学会論文集，vol.89，(928)，2023.12

  2. Statistical model comparison based on variation parameters for monitoring thermal deformation of workpiece in end-milling

    Mengmeng Yang, Feng Zhang, and Koji Teramoto，International Journal of Advcanced Manufacturing Technology，2023.09

  3. Statistics-Based Measuring Point Selection for Monitoring the Thermal Deformation of a Workpiece in End-Milling

    Mengmeng Yang, Feng Zhang, and Koji Teramoto， International Journal of Automation Technology，vol.16，(5)，(p.562 ～ 571)，2022.09

  4. On-machine Estimation of Workholding State for Thin-walled Parts

    Zeng, Jingkai, Teramoto, Koji, Matsumoto, Hiroki，International Journal of Automation Technology，vol.15，(6)，(p.860 ～ 867)，2021.11

  5. Statistical Modelling of Machining Error for Model-based Elastomer End-milling

    Chainawakul, Adirake, Teramoto, Koji, Matsumoto, Hiroki，International Journal of Automation Technology，vol.15，(6)，(p.852 ～ 859)，2021.11

  6. An Evaluation Criterion to Select Temperature Measurement Positions in End-Milling

    Dongjin Wu and Koji Teramoto，International Journal of Automation Technology，vol.12，(1)，(p.105 ～ 112)，2018.01

  7. Analysis of cutting force in elastomer end milling

    Koji Teramoto, Takahiro Kunishima, Hiroki Matsumoto，International Journal of Automation Technology，vol.11，(6)，(p.958 ～ 963)，2017.11

  8. On-Machine Estimation of Workpiece Deformation for Thin-Structured Parts Machining

    Koji Teramoto，International Journal of Automation Technology，vol.11，(6)，(p.978 ～ 983)，2017.11

  9. Practical Education on Mechanical Design and Drafting at Muroran Institute of Technology : Groping Cooperation between Drafting Exercise and Machining Practice

    風間 俊治, 藤木 裕行, 松本 大樹, 寺本 孝司, 長船 康裕，設計工学，vol.47，(5)，(p.236 ～ 243)，2012.05

  10. A basic study for tailor-made body-powered prosthetic hand

    Koji Teramoto, Shinya Yokota, Masashi Ishitani，Chiang Mai University Journal of Natural Sciences ，vol.10，(p.115 ～ 125)，2011.08

  11. Development of Microrobot for Curved Hole Electrical Discharge Machining

    北 正彦，石田 徹，寺本 孝司，竹内芳美，Journal of the Japan Society for Precision Engineering，vol.75，(11)，(p.1355 ～ 1359)，2009.11

  12. Development of an Electrode Motion Control Device for Curved Hole Electrical Discharge Machining

    Tohru Ishida, Yasuhito Miyake, Koji Teramoto, Yoshimi Takeuchi，International Journal of Automation Technology，vol.Vol.2，(No.6)，(p.447 ～ 456)，2008.11

  13. Development of an Electrode Motion Control Device for Curved Hole Electrical Discharge Machining

    Tohru Ishida, Yasuhito Miyake, Koji Teramoto, Yoshimi Takeuchi，International Journal of Automation Technology，vol.Vol.2，(No.6)，(p.447 ～ 456)，2008.11

  14. A framework of compositional machining simulation for versatile machining simulation

    Koji Teramoto, Jun'ichi Kaneko, Tohru Ishida, Yoshimi Takeuchi，JSME Journal of Advanced Mechanical Design, Systems, and Manufacturing，vol.2，(4)，(p.668 ～ 674)，2008.07

  15. V-Shaped Microgrooving with Two Flat-Ends by 6-axis Control Machining

    守屋貴雅，石田 徹，寺本孝司，榎本俊之,竹内芳美，Journal of the Japan Society for Precision Engineering，vol.73，(10)，(p.1137 ～ 1141)，2007.10

  16. General Tool Setting Error Compensation Method for 5-axis Control Ultraprecision Maghining

    園 真，石田 徹，寺本孝司，榎本俊之，竹内芳美，Journal of the Japan Society for Precision Engineering，vol.73，(10)，(p.1154 ～ 1158)，2007.10

  17. Effective Tool Path Generation Method for Roughing in Multi-axis Control Machining

    梅原 猛，石田 徹，寺本孝司，竹内芳美，Transaction of the Japan Society of Mechanical Engineers，vol.73，(732)，(p.2387 ～ 2393)，2007.08

  18. TM01-mode microwave propagation property analysis for plasmas with disk-plate windows by a finite-difference time-domain method

    Yoshimasa Okamura, Yoshito Yamamoto, Kazuhiro Fujita, Taiki Miyoshi, Koji Teramoto, Hideki Kawaguchi, Shin Kagami, Masakazu Furukawa，Journal of Vacuum Science & Technology A: Vacuum, Surfaces, and Films，vol.25，(4)，(p.816 ～ 823)，2007.04

  19. Thermal state visualization of machining workpiece by means of sensor-configured heat conductive simulation

    Teramoto, K., Tanaka, R., Ishida, T., Takeuchi, Y.，JSME International Journal Series C，vol.49，(2)，(p.287 ～ 292)，2006

  20. Life Cycle Simulation Considering Behavioral Preferences of Consumers and Suppliers

    田中将貴，小野里雅彦，寺本孝司，竹内芳美，Journal of the Japan Society for Precision Engineering，vol.72，(2)，(p.271 ～ 275)，2006

  21. 5-Axis Control Tool Path Generation Using Curved Surface Interpolation

    森川真寿，石田 徹，寺本孝司，竹内芳美，Transaction of the Japan Society of Mechanical Engineers，vol.72，(713)，(p.255 ～ 260)，2006

  22. Tool Posture Determination for 5-axis Control Machining by Area Division Method

    Umehara, T., Teramoto, K., Ishida, T. and Takeuchi, Y.，JSME International Journal Series C，vol.49，(1)，(p.35 ～ 42)，2006

  23. Curved Interpolation CL Data Creation for 5-axis Control Machining Expressed by Non-Uniform B-Spline

    富永有機，寺本孝司，石田徹，本田尚義，竹内芳美，Transaction of the Japan Society of Mechanical Engineers，vol.72，(719)，(p.2286 ～ 2292)，2006

  24. An implicit shape estimation method for cutting force prediction in end-milling : Calculation of undeformed chip thickness based on tool swept volumes

    金子純一，寺本孝司，堀尾健一郎，竹内芳美，Journal of the Japan Society for Precision Engineering，vol.72，(2)，(p.229 ～ 223)，2006

  25. Cutting Force Prediction in End Milling with Small Depth of Cut in Consideration of Cutting Situation Change : Prediction of Cutting Error in Case of Square End Mill with a Helical Flute (2nd Report)

    金子純一，寺本孝司，小野里雅彦，竹内芳美，Journal of the Japan Society for Precision Engineering，vol.70，(3)，(p.423 ～ 427)，2004

  26. Coordinative Operation Planningfor End Milling

    寺本孝司，小野里雅彦，Transaction of the Japan Society of Mechanical Engineers，vol.70，(694)，(p.1824 ～ 1829)，2004

  27. Development of Active Knowledge Archives based on Virtual Manufacturing Systems

    Onosato, M., Asao, Y., Ye, H, Teramoto, K.，CIRP Journal of Manufacturing Systems，vol.33，(2)，(p.151 ～ 159)，2004

  28. Configuration of Task Support Environment for the Enhancement of Machining Skills

    Teramoto, K., Onosato, M.，CIRP Journal of Manufacturing Systems，vol.33，(4)，(p.355 ～ 361)，2004

  29. Accurate Prediction of Cutting Force in Ball End Milling based on Model Learning

    寺本孝司，小野里雅彦，Journal of the Japan Society for Precision Engineering，vol.69，(8)，(p.1098 ～ 1103)，2003

  30. Cutting Force Prediction in End Milling with Small Depth of Cut in Consideration of Cutting Situation Change : In Case of Straight Flute End Mill (1 st Report)

    金子純一，寺本孝司，小野里雅彦，竹内芳美，Journal of the Japan Society for Precision Engineering，vol.69，(11)，(p.1605 ～ 1609)，2003

  31. A Framework of Human-Computer Collaboration for Situation Conscious Operation Planning

    Teramoto, K., Onosato, M., Iwata, K.，CIRP Journal of Manufacturing Systems，vol.31，(3)，(p.235 ～ 240)，2002

  32. Working in a Digital Factory: Interface between Human and Virtual Manufacturing Systems

    Onosato, M., Osaki, S., Nitano, M., Teramoto, K., Iwata, K.，CIRP Journal of Manufacturing Systems，vol.29，(3)，(p.271 ～ 275)，1999

  33. Coordinative generation of machining and fixturing plans by a modularized problem solver

    Teramoto, K., Onosato, M., Iwata, K.,，Annals of the CIRP，vol.47，(1)，(p.437 ～ 440)，1998

  34. Proficient Machine Systems: A Proposal of New Research Frontiers for Manufacturing in The 21st Century

    Iwata, K., Onosato, M., Teramoto, K.，CIRP Journal of Manufacturing Systems，vol.27，(1)，(p.17 ～ 22)，1998

  35. Development of Novel Assembly Machine based on Human Skill and Dexterity - Adaptive Motion Control utilizing Contacts among Assembly Parts

    Iwata, K., Hirai, S., Teramoto, K., Tsuchiya, S., and Matsumoto, K.，CIRP Journal of Manufacturing Systems，vol.26，(2)，(p.75 ～ 80)，1997

  36. An Architecture for Form Feature Modeling for Concurrent, Cooperative and Consistent Product Design

    Iwata, K., Onosato, M., Teramoto, K. and Seo，JSME International Journal Series C，vol.40，(3)，(p.533 ～ 539)，1997

  37. Virtual Manufacturing Systems as Advanced Information Infrastructure for Integrating Manufacturing Resources and Activities

    Iwata, K., Onosato, M., Teramoto, K., and Osaki, S.，Annals of the CIRP，vol.46，(1)，(p.335 ～ 338)，1997

  38. A Modelling and Simulation Architecture for Virtual Manufacturing Systems

    Iwata, K., Onosato, M., Teramoto, K., and Osaki, S.，Annals of the CIRP，vol.44，(1)，(p.399 ～ 402)，1995

< PREV - NEXT >

  • 1
To the head of this page.▲