Papers - Kishimoto Hirotatsu

1. Effects of size and static temperature exposure on the shear strength of tungsten bonded CFC blocks for divertor in JT-60SA

   Hirotatsu Kishimoto, Naofumi Nakazato, Joon-Soo Park, Sang-Hyun Jung, Masakatsu Fukumoto，FUSION ENGINEERING AND DESIGN，vol.201 ，Article Number:114279，2024.02

   

2. Effect of the fabrication process on the microstructural evolution of carbon fibers and flexural property on C/SiC composites by the NITE method

   Sang-Hyun Jung, Hirotatsu Kishimoto, Naofumi Nakazato, Daisuke Nakata, Joon-Soo Park, Akira Kohyama，Ceramics International，vol.48，(p.32712 ～ 32722)，2022.07

   

3. Silicon dissolution and morphology modification of NITE SiC/SiC claddings in pressurized flowing water under neutron irradiation

   Hirotatsu Kishimoto, Joon-Soo Park, Naofumi Nakazato, Akira Kohyama，Journal of Nuclear Materials，vol.557，Article Number:153253，2021.08

   

4. Microstructural stability of tungsten coated CFC plates aiming to metal Wall experiments at JT-60SA

   Hirotatsu Kishimoto, Wataru Kondo, Naofumi Nakazato, Masakatsu Fukumoto，FUSION ENGINEERING AND DESIGN，vol.161，Article Number:111887，2020.12

   

5. Simultaneous effects of dissolved oxygen and applied stress on surface morphology of steels for cooling systems of blanket module in pressurized water

   Naofumi Nakazato, Hiroki Mima, Taisei Nemoto, Motoki Nakajima, Takashi Nozawa, Hiroyasu Tanigawa, Hirotatsu Kishimoto，FUSION ENGINEERING AND DESIGN，vol.159，Article Number:111681，2020.10

   

6. Effects of sintering conditions on the microstructure of Li2TiO3 tritium breeding materials

   Jong-Il Kim, Yi-Hyun Park, Mu-Young Ahn, Hirotatsu Kishimoto, Youngmin Lee, Seungyon Cho，FUSION ENGINEERING AND DESIGN，vol.156，Article Number:111727，2020.07

   

7. Experimental studies on joinability of zircaloy and SiC/SiC composite with titanium powder.

   Serizawa H, Nakazato N, Sato Y, Tsukamoto M, Park J‐S, Kishimoto H.， International Journal of Ceramic Engineering and Science，vol.1，(1)，(p.57 ～ 63)，2019.04

   

8. Effect of Slit Shape on Joinability of Zircaloy-SiC/SiC Composite Tube Joint with Titanium Powder

   [66]. Hisashi Serizawa, Yuji Sato, Naofumi Nakazato, Masahiro Tsukamoto, Hirotatsu Kishimoto，Materials Science Forum，vol.941，(p.1944 ～ 1949)，2018.12

   

9. Appropriate thickness of pyrolytic carbon coating on SiC fiber reinforcement to secure reasonable quasi-ductility on NITE SiC/SiC composites

   Naofumi Nakazato, Hirotatsu Kishimoto, Joon-Soo Park，Ceramics International，vol.44，(16)，(p.19307 ～ 19313)，2018.11

   

10. Fabrication of Tungsten and Carbon Clad Plates by Sinter Bonding Methods for Divertor System Characterization

    H. Kishimoto, Y. Asakura, M. Matano, N. Nakazato, J.S. Park, T. Shibayama and M. Fukumoto，Fusion Engineering and Design，vol.136，(Part A)，(p.116 ～ 119)，2018.11

    

11. Oxidation resistance of NITE-SiC/SiC composites with/without CVD-SiC environmental barrier coating

    J-S. Park, N. Nakazato, H. Kishimoto, J-I Kim, S. Makimura，Ceramics International，vol.44，(14)，(p.17319 ～ 17325)，2018.10

    

12. Specimen size effects on fracture behaviour of SiC/SiC tubes during circumferential tensile test

    Ju-Hyeon Yu, Hirotatsu Kishimoto, Naofumi Nakazato, Joon-Soo Park, Akira Kohyama，ADVANCED COMPOSITE MATERIALS，vol.27，(5)，(p.531 ～ 539)，2018

    

13. High speed formation of pyro-carbon coat on silicon carbide fiber by continuous chemical vapor deposition furnace

    Joon-Soo Park, Naofumi Nakazato, Naoyuki Takayama, Hirotatsu Kishimoto, Akira Kohyama，Fusion Engineering and Design，vol.125，(p.442 ～ 446)，2017.12

    

14. Thermal property and microstructural characterization of W/SiC clad plates

    Yuuki Asakura, Hirotatsu Kishimoto, Joon-Soo Park, Naofumi Nakazato, Tamaki Shibayama, Akira Kohyama，Fusion Engineering and Design，vol.125，(p.484 ～ 489)，2017.12

    

15. Fabrication of short SiC fiber reinforced SiC matrix composites with high fiber volume fraction

    Joon-Soo Park, Hiroshi Nishimura, Daisuke Hayasaka, Ju-Hyeon Yu, Hirotatsu Kishimoto, Akira Kohyama ，Fusion Engineering and Design，vol.109–111，(p.1174 ～ 1178)，2016.11

    

16. Destructive and non-destructive evaluation methods of interface on F82H HIPed joints

    Kishimoto, Hirotatsu ;Muramatsu, Yusuke; Asakura, Yuki ;Endo, Tetsuo; Kohyama, Akira，FUSION ENGINEERING AND DESIGN，vol.109–111，(p.1744 ～ 1747)，2016.11

    

17. Microstructural modification of W-SiC bonded plate during high temperature exposure

    Asakura, Yuuki; Kishimoto, Hirotatsu ; Nakazato, Naofumi ; Park, Joon-Soo; Kohyama, Akira，FUSION ENGINEERING AND DESIGN ，vol.109–111，(p.1678 ～ 1681)，2016.11

    

18. Gas leak tightness of SiC/SiC composites at elevated temperature

    Hayasaka, Daisuke ;Park, Joon-Soo. ;Kishimoto, Hirotatsu ; Kohyama, Akira，FUSION ENGINEERING AND DESIGN ，vol.109–111，(p.1498 ～ 1501)，2016.11

    

19. Circumferential tensile test method for mechanical property evaluation of SiC/SiC tube

    Yu, Ju-Hyeon; Kishimoto, Hirotatsu; Park, Joon-soo; Nakazato, Naofumi; Kohyama, Akira，FUSION ENGINEERING AND DESIGN ，vol.109–111，(p.1261 ～ 1266)，2016.11

    

20. Development of Joining Method between Zircaloy and SiC/SiC Composite Tubes by Using Diode Laser

    Hisashi Serizawa, Yuuki Asakura, Hirotaka Motoki, Daisuke Tanigawa, Masahiro Tsukamoto, Joon Soo Park, Hirotatsu Kishimoto, Akira Kohyama，Materials Science Forum，vol.879，(p.1743 ～ 1748)，2016.11

    

21. High performance SiC/SiC components by NITE-method and Its Application to Energy and Environment

    A. Kohyama, D. Hayasaka, H. Kishimoto, J.S. Park，Ceramic Transactions，vol.237，(p.37 ～ 52)，2016.08

    

22. Development of Joining Method for Zircaloy and SiC/SiC Composite Tubes by Using Fiber Laser

    Hisashi Serizawa, Yuuki Asakura, Joon-Soo Park, Hirotatsu Kishimoto and Akira Kohyama，Ceramic Transactions，vol.255，(p.177 ～ 184)，2016.08

    

23. Helium permeability of high-performance SiC/SiC tube

    Hayasaka, Daisuke ; Kishimoto, Hirotatsu ;Kohyama, Akira，JOURNAL OF NUCLEAR SCIENCE AND TECHNOLOGY，vol.53，(12)，(p.2034 ～ 2039)，2016

    

24. Oxidation and High Temperature Resistance of SiC/SiC Composites by Nite-Method

    Daisuke Hayasaka, Hirotatsu Kishimoto, Joon-Soo Park, Akira Kohyama，Advanced and Refractory Ceramics for Energy Conservation and Efficiency: Ceramic Transactions，vol.256，(p.29 ～ 35)，2015.08

    

25. SiC/SiC Fuel Cladding by NITE process for Innovative LWR –Concept and Process Development of Fuel Pin Assembly Technologies-

    H. Kishimoto, T.Shibayama, Y.Asakura, D.Hayasaka, Y. Kohno,A. Kohyama，Ceramic Transactions，vol.246，(p.93 ～ 98)，2014

    

26. SiC/SiC Fuel Cladding by NITE process for Innovative LWR –Pre-composite Ribbon Design and Fabrication-

    Y.Asakura, D.Hayasaka, J.S.Park, H. Kishimoto, A. KohyamaFabrication-", Ceramic Transactions, 246, p.79-84，Ceramic Transactions，vol.246，(p.79 ～ 84)，2014

    

27. SiC/SiC Fuel Cladding by NITE process for Innovative LWR –Cladding Forming Process Development-

    N. Nakazato, H. Kishimoto, Y. Kohno,A. Kohyama，Ceramic Transactions，vol.246，(p.109 ～ 115)，2014

    

28. SiC/SiC Fuel Cladding by NITE process for Innovative LWR –Compatibility with High Temperature Pressurized Water-

    C.Kanda, Y.Kanda, H. Kishimoto, A. Kohyama，Ceramic Transactions，vol.246，(p.85 ～ 92)，2014

    

29. SiC / SiC composite materials for nuclear applications

    A. Kohyama, H. Kishimoto，Nuclear Safety and Simulation，vol.4，(p.72 ～ 79)，2013

    

30. Toughness characterization by small specimen test technique for HIPed joints of F82H steel aiming at first wall fabrication in fusion

    H. Kishimoto, T. Ono, H. Sakasegawa, H. Tanigawa, Y. Kohno, A. Kohyama，Journal of Nuclear Materials，vol.440，(p.622 ～ 626)，2013

    

31. Behavior of W-SiC/SiC dual layer tiles under LHD plasma exposure

    W.A. Mohrez, H. Kishimoto, Y. Kohno, S. Hirotaki, A. Kohyama，Journal of Nuclear Materials，vol.442，(p.382 ～ 388)，2013

    

32. Effect of 10 MW/m2 plasma exposure on W-SiC/SiC dual layer tiles

    W. A. Mohrez, A. Kohyama, H. Kishimoto, Y. Kohno，Fusion Engineering and Design，vol.88，(p.1655 ～ 1659)，2013

    

33. Oxide formation and precipitation behaviors on interface of F82H steel joints during HIPing and hot pressing

    H. Kishimoto, T. Ono, H. Sakasegawa, H. Tanigawa, M. Ando, T. Shibayama, Y. Kohno, A. Kohyama，Journal of Nuclear Materials，vol.442，(p.S546-S551 ～ )，2013

    

34. SiC/SiC composite heater for IFMIF

    T. Abe, H. Kishimoto, N. Nakazato, J.S. Park, H.C. Jung, Y. Kohno, A. Kohyama，Fusion Engineering and Design，vol.87，(p.1258 ～ 1260)，2012

    

35. Characterization of the oxide particles in Al-added high-Cr ODS ferritic steels

    C.H. Zhang, A. Kimura, R. Kasada, J. Jang, H. Kishimoto, Y.T. Yang，Journal of Nuclear Materials，vol.417，(p.221 ～ 224)，2011

    

36. Testing Temperatures and Deflection Rates Dependencies of Hydrogen Embrittlements on RAFs

    T. Sakamura, S. Komazaki, H. Kishimoto, Y. Kohno，Journal of Nuclear Materials，vol.417，(p.33 ～ 35)，2011

    

37. Development of Al added high-Cr ODS steels for fuel cladding of next generation nuclear systems

    A. Kimura, R. Kasada, N. Iwata, H, Kishimoto, C.H. Zhang, J. Isselin, P. Dou, J.H. Lee, N. Muthukumar, T. Okuda, M. Inoue, S. Ukai, S. Ohnuki, T. Fujisawa, F. Abe，Journal of Nuclear Materials，vol.417，(p.176 ～ 179)，2011

    

38. Dose dependence of irradiation hardening of binary ferritic alloys irradiated with Fe3+ ions

    K. Yabuuchi, H. Yano, R. Kasada, H. Kishimoto, A. Kimura，Journal of Nuclear Materials，vol.417，(p.988 ～ 991)，2011

    

39. Micro-Chemical Aalysis of Dffusion Bnded W-SiC Joint

    G. Matsuo, T. Shibayama, H. Kishimoto, K. Hamada, S. Watanabe，Journal of Nuclear Materials，vol.417，(p.391 ～ 394)，2011

    

40. Microstructural and Mechanical Characterization of W/SiC Bonding for Structural Material in Fusion

    H. Kishimoto, T. Shibayama, K. Shimoda, T. Kobayashi, A. Kohyama，Journal of Nuclear Materials，vol.417，(p.387 ～ 390)，2011

    

41. Torsion test technique for interfacial shear evaluation of F82 HRAFM HIP-joints

    T. Nozawa, H. Ogiwara, J. Kannari, H. Kishimoto and H. Tanigawa，Fusion Engineering and Design，vol.86，(p.2512 ～ 2516)，2011

    

42. Effects of preform densification on microstructure and mechanical properties of SiC/SiC composites

    中里直史、　岸本弘立、　朴　峻秀、鄭　憲採、幸野　豊、香山　晃，Journal of the Japan Institute of Metals，vol.75，(3)，(p.146 ～ 151)，2011

    

43. Enchanced high-temperature performances of SiC/SiC composites by high densification and crystalline structure

    K. Shimoda, T. Hinoki, H. Kishimoto, A. Kohyama，A. Composites Science and Technology，vol.71，(p.326 ～ 332)，2011

    

44. Materials Science Forum

    R. Kasada, H. Takahashi, H. Kishimoto, K. Yutani, A. Kimura，Materials Science Forum，vol.654－656，(p.2791 ～ 2794)，2010

    

45. Stability of Y-Ti complex oxides in Fe-16Cr-0.1Ti ODS ferritic steel before and after heavy-ion irradiation

    H. Kishimoto, R. Kasada, O. Hashitomi, A. Kimura,，Journal of Nuclear Materials，vol.386-388，(p.533 ～ 536)，2009