論文 - 岸本　弘立

1. Effects of size and static temperature exposure on the shear strength of tungsten bonded CFC blocks for divertor in JT-60SA

   Hirotatsu Kishimoto, Naofumi Nakazato, Joon-Soo Park, Sang-Hyun Jung, Masakatsu Fukumoto，FUSION ENGINEERING AND DESIGN，201 巻，Article Number:114279，2024年02月

   

2. Effect of the fabrication process on the microstructural evolution of carbon fibers and flexural property on C/SiC composites by the NITE method

   Sang-Hyun Jung, Hirotatsu Kishimoto, Naofumi Nakazato, Daisuke Nakata, Joon-Soo Park, Akira Kohyama，Ceramics International，48巻，(頁 32712 ～ 32722)，2022年07月

   

3. Silicon dissolution and morphology modification of NITE SiC/SiC claddings in pressurized flowing water under neutron irradiation

   Hirotatsu Kishimoto, Joon-Soo Park, Naofumi Nakazato, Akira Kohyama，Journal of Nuclear Materials，557巻，Article Number:153253，2021年08月

   

4. Microstructural stability of tungsten coated CFC plates aiming to metal Wall experiments at JT-60SA

   Hirotatsu Kishimoto, Wataru Kondo, Naofumi Nakazato, Masakatsu Fukumoto，FUSION ENGINEERING AND DESIGN，161巻，Article Number:111887，2020年12月

   

5. Simultaneous effects of dissolved oxygen and applied stress on surface morphology of steels for cooling systems of blanket module in pressurized water

   Naofumi Nakazato, Hiroki Mima, Taisei Nemoto, Motoki Nakajima, Takashi Nozawa, Hiroyasu Tanigawa, Hirotatsu Kishimoto，FUSION ENGINEERING AND DESIGN，159巻，Article Number:111681，2020年10月

   

6. Effects of sintering conditions on the microstructure of Li2TiO3 tritium breeding materials

   Jong-Il Kim, Yi-Hyun Park, Mu-Young Ahn, Hirotatsu Kishimoto, Youngmin Lee, Seungyon Cho，FUSION ENGINEERING AND DESIGN，156巻，Article Number:111727，2020年07月

   

7. Experimental studies on joinability of zircaloy and SiC/SiC composite with titanium powder.

   Serizawa H, Nakazato N, Sato Y, Tsukamoto M, Park J‐S, Kishimoto H.， International Journal of Ceramic Engineering and Science，1巻，1号，(頁 57 ～ 63)，2019年04月

   

8. Effect of Slit Shape on Joinability of Zircaloy-SiC/SiC Composite Tube Joint with Titanium Powder

   [66]. Hisashi Serizawa, Yuji Sato, Naofumi Nakazato, Masahiro Tsukamoto, Hirotatsu Kishimoto，Materials Science Forum，941巻，(頁 1944 ～ 1949)，2018年12月

   

9. Appropriate thickness of pyrolytic carbon coating on SiC fiber reinforcement to secure reasonable quasi-ductility on NITE SiC/SiC composites

   Naofumi Nakazato, Hirotatsu Kishimoto, Joon-Soo Park，Ceramics International，44巻，16号，(頁 19307 ～ 19313)，2018年11月

   

10. Fabrication of Tungsten and Carbon Clad Plates by Sinter Bonding Methods for Divertor System Characterization

    H. Kishimoto, Y. Asakura, M. Matano, N. Nakazato, J.S. Park, T. Shibayama and M. Fukumoto，Fusion Engineering and Design，136巻，Part A号，(頁 116 ～ 119)，2018年11月

    

11. Oxidation resistance of NITE-SiC/SiC composites with/without CVD-SiC environmental barrier coating

    J-S. Park, N. Nakazato, H. Kishimoto, J-I Kim, S. Makimura，Ceramics International，44巻，14号，(頁 17319 ～ 17325)，2018年10月

    

12. Specimen size effects on fracture behaviour of SiC/SiC tubes during circumferential tensile test

    Ju-Hyeon Yu, Hirotatsu Kishimoto, Naofumi Nakazato, Joon-Soo Park, Akira Kohyama，ADVANCED COMPOSITE MATERIALS，27巻，5号，(頁 531 ～ 539)，2018年

    

13. High speed formation of pyro-carbon coat on silicon carbide fiber by continuous chemical vapor deposition furnace

    Joon-Soo Park, Naofumi Nakazato, Naoyuki Takayama, Hirotatsu Kishimoto, Akira Kohyama，Fusion Engineering and Design，125巻，(頁 442 ～ 446)，2017年12月

    

14. Thermal property and microstructural characterization of W/SiC clad plates

    Yuuki Asakura, Hirotatsu Kishimoto, Joon-Soo Park, Naofumi Nakazato, Tamaki Shibayama, Akira Kohyama，Fusion Engineering and Design，125巻，(頁 484 ～ 489)，2017年12月

    

15. Fabrication of short SiC fiber reinforced SiC matrix composites with high fiber volume fraction

    Joon-Soo Park, Hiroshi Nishimura, Daisuke Hayasaka, Ju-Hyeon Yu, Hirotatsu Kishimoto, Akira Kohyama ，Fusion Engineering and Design，109–111巻，(頁 1174 ～ 1178)，2016年11月

    

16. Destructive and non-destructive evaluation methods of interface on F82H HIPed joints

    Kishimoto, Hirotatsu ;Muramatsu, Yusuke; Asakura, Yuki ;Endo, Tetsuo; Kohyama, Akira，FUSION ENGINEERING AND DESIGN，109–111巻，(頁 1744 ～ 1747)，2016年11月

    

17. Microstructural modification of W-SiC bonded plate during high temperature exposure

    Asakura, Yuuki; Kishimoto, Hirotatsu ; Nakazato, Naofumi ; Park, Joon-Soo; Kohyama, Akira，FUSION ENGINEERING AND DESIGN ，109–111巻，(頁 1678 ～ 1681)，2016年11月

    

18. Gas leak tightness of SiC/SiC composites at elevated temperature

    Hayasaka, Daisuke ;Park, Joon-Soo. ;Kishimoto, Hirotatsu ; Kohyama, Akira，FUSION ENGINEERING AND DESIGN ，109–111巻，(頁 1498 ～ 1501)，2016年11月

    

19. Circumferential tensile test method for mechanical property evaluation of SiC/SiC tube

    Yu, Ju-Hyeon; Kishimoto, Hirotatsu; Park, Joon-soo; Nakazato, Naofumi; Kohyama, Akira，FUSION ENGINEERING AND DESIGN ，109–111巻，(頁 1261 ～ 1266)，2016年11月

    

20. Development of Joining Method between Zircaloy and SiC/SiC Composite Tubes by Using Diode Laser

    Hisashi Serizawa, Yuuki Asakura, Hirotaka Motoki, Daisuke Tanigawa, Masahiro Tsukamoto, Joon Soo Park, Hirotatsu Kishimoto, Akira Kohyama，Materials Science Forum，879巻，(頁 1743 ～ 1748)，2016年11月